dmesg - RPi0W John the Ripper
Booting Linux on physical CPU 0x0
Linux version 4.9.24+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #993 Wed Apr 26 17:56:54 BST 2017
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
OF: fdt:Machine model: Raspberry Pi Zero W Rev 1.1
cma: Reserved 8 MiB at 0x1b400000
Memory policy: Data cache writeback
On node 0 totalpages: 114688
free_area_init_node: node 0, pgdat c0914814, node_mem_map db010000
Normal zone: 1008 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 114688 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113680
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 435944K/458752K available (5942K kernel code, 489K rwdata, 1948K rodata, 404K init, 734K bss, 14616K reserved, 8192K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc05d5d7c (5944 kB)
.init : 0xc083f000 - 0xc08a4000 ( 404 kB)
.data : 0xc08a4000 - 0xc091e6c8 ( 490 kB)
.bss : 0xc091e6c8 - 0xc09d5ec8 ( 734 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
bcm2835: system timer (irq = 27)
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Disabling cpuset control group subsystem
CPU: Testing write buffer coherency: ok
ftrace: allocating 21708 entries in 64 pages
Setting up static identity map for 0x8200 - 0x8238
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
bcm2835-mbox 2000b880.mailbox: mailbox enabled
bcm2835-dma 20007000.dma: DMA legacy API manager at dc80d000, dmachans=0x1
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raspberrypi-firmware soc:firmware: Attached to firmware from 2017-04-27 17:19
clocksource: Switched to clocksource timer
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
workingset: timestamp_bits=14 max_order=17 bucket_order=3
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
BCM2708FB: allocated DMA memory 5b500000
BCM2708FB: allocated DMA channel 0 @ dc80d000
Console: switching to colour frame buffer device 228x61
bcm2835-rng 20104000.rng: hwrng registered
vc-cma: Videocore CMA driver
vc-cma: vc_cma_base = 0x00000000
vc-cma: vc_cma_size = 0x00000000 (0 MiB)
vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Core Release: 2.80a
Setting default values for core params
Finished setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
Dedicated Tx FIFOs mode
WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xdb514000 dma = 0x5b514000 len=9024
FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
dwc_otg: Microframe scheduler enabled
WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc0450738
WARN::hcd_init_fiq:460: FIQ ASM at 0xc0450a14 length 36
WARN::hcd_init_fiq:486: MPHI regs_base at 0xdc8a5000
dwc_otg 20980000.usb: DWC OTG Controller
dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
dwc_otg 20980000.usb: irq 56, io mem 0x00000000
Init: Port Power? op_state=1
Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.9.24+ dwc_otg_hcd
usb usb1: SerialNumber: 20980000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
bcm2835-cpufreq: min=700000 max=1000000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhost-bcm2835 20202000.sdhost: could not get clk, deferring probe
mmc-bcm2835 20300000.mmc: could not get clk, deferring probe
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
vchiq: vchiq_init_state: slot_zero = 0xdb580000, is_master = 0
Initializing XFRM netlink socket
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
vc-sm: Videocore shared memory driver
[vc_sm_connected_init]: start
[vc_sm_connected_init]: end - returning 0
sdhost: log_buf @ db513000 (5b513000)
Indeed it is in host mode hprt0 = 00041901
mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 20300000.mmc: DMA channel allocated
random: fast init done
of_cfs_init
of_cfs_init: OK
usb 1-1: new low-speed USB device number 2 using dwc_otg
Indeed it is in host mode hprt0 = 00041901
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address 59b4
mmcblk0: mmc0:59b4 USD00 14.7 GiB
mmcblk0: p1 p2
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
usb 1-1: New USB device found, idVendor=046d, idProduct=c517
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Receiver
usb 1-1: Manufacturer: Logitech
devtmpfs: mounted
mmc1: new high speed SDIO card at address 0001
Freeing unused kernel memory: 404K (c083f000 - c08a4000)
This architecture does not have kernel memory protection.
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'arm'.
NET: Registered protocol family 10
systemd[1]: Inserted module 'ipv6'
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: Cannot add dependency job for unit regenerate_ssh_host_keys.service, ignoring: Unit regenerate_ssh_host_keys.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd-udevd[119]: starting version 215
gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
input: Logitech USB Receiver as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:046D:C517.0001/input/input0
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-20980000.usb-1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
usbcore: registered new interface driver brcmfmac
input: Logitech USB Receiver as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.1/0003:046D:C517.0002/input/input1
logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-20980000.usb-1/input1
brcmfmac: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
systemd-journald[117]: Received request to flush runtime journal from PID 1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
brcmfmac: power management disabled
random: crng init done
Adding 102396k swap on /var/swap. Priority:-1 extents:5 across:200700k SSFS
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized